New Element Building Material Co., Ltd.
Main products:Fiber Cement Board,Lap Siding,Cladding,Ceiling And Partition,Calcium Silicate Board
Products
Contact Us
  • Contact Person : Ms. Wong Crystal
  • Company Name : New Element Building Material Co., Ltd.
  • Tel : 86-757-86850609
  • Fax : 86-757-86850606
  • Address : Guangdong,foshan,west of baiye avenue,xiqiao technological & industrial park,nanhai
  • Country/Region : China
  • Zip : 528211

Joint filler for calcium silicate board

Joint filler for calcium silicate board
Product Detailed
SENTEGO joint filler is a kind of material secialized in the use of joint filling for building board.

SENTEGO joint filler is a kind of material secialized in the use of joint filling for building board.

With the wide application of light board (Fiber cement board, Calcium silicate board, Plaster board .ect) in the construction decoration. The problem of cracks between the board is becoming particularly important.

SENTEGO joint filler can effectively avoid the cracking and separation phenomenon of board joints. Its composition and compounds do not contain harmful substances for health.

SENTEGO is far superior to other joint compound:

Instruction

Clean the places requiring filling, dust clearing is the main purpose of this step.Clean the places to be filled once with clear water.1st fill: Press the joint filler plaster for approx 1mm thickness 50mm wide for groove edge board with filling knife or caulker when the board is still wet ,square edge board approx 0.5mm thickness. Allow to set (approx 1.5-2 hours).To seal joints between boards, press with hand to the Self-adhesive Joint tape firmly into position.2nd fill: Apply filler firmly into tapered depression where board meet and ‘Smooth out’ with filling knife or caulker ,approx another 1mm thickness 50mm wide. To produce minimal ‘Crowning effect’Fill depressions above nail heads. Smooth out with filling knife. When set ,Sand lightly with fine Sanding and Painting shall be continued when the joint filler are completely dried or 24h later when the step 5 is completed.

 Specification

Ambient temperature:   10°C-+45°C

Maximum tolerant temperature: +130°C

Ambient temperature in construction: +5°C above

Ambient humidity in use : 25%RH-98%RH 

Packaging and storage :   6kg and 30kg

Keep sealed and place in the cooling places for 6 months

Material capacity consumption of Sentego joint filer & Joint tape:

Type of board

Application

Square edge(kg/m2)

Groove edge (kg/m2)

Joint Tape(m/m2)

Calcium silicate board

Ceiling

0.12~0.15

0.18~0.20

1.2~1.3

Partition Wall

0.13~0.16

0.19~0.22

1.2~1.3

Double sides

Partition Wall

0.23~0.27

0.37~0.42

1.2~1.3

Joint filler for calcium silicate board



Copyright Notice @ 2008-2012 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.